vr
86-10-82921131 export@huatecgroup.com
Home  /  Products  /  Ultrasonic Thickness Gauge  /  Scan Mode 0.75 - 300mm Ut Thickness Gauge Ultrasonic Thickness Gauge TG3100 For Epoxies, Glass
Product Description
Scan Mode 0.75 - 300mm Ut Thickness Gauge Ultrasonic Thickness Gauge TG3100 For Epoxies, Glass
 

Scope of applications

Ultrasonic Thickness Gauge measuring with ultrasonic wave, is applicable for measuring the thickness of any material in which ultrasonic wave can be transmitted and reflected back from the other face.

The gauge can provide quick and accurate measurement to various work pieces such as sheets of board and processing parts. Another important application of the gauge is to monitor various pipes and pressure vessels in production equipment, and monitor the thinning degree during using. It can be widely used in petroleum, chemical, metallurgy, shipping, aerospace, aviation and other fields
 

Measuring Principle

The digital ultrasonic thickness gauge determines the thickness of a part or structure by accurately measuring the time required for a short ultrasonic pulse generated by a transducer to travel through the thickness of the material,reflect form the back or inside surface, and be returmed to the transducer.The measured two-way transit time is divided by two to account for the down-and-back travel path,and then multiplied by the velocity of sound in the material.

 
Features
1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.
2.Transducer models are available for special application, including for coarse grain material and high temperature applications.
3.Two-Point Calibration function.
4.Two work modes: Single point mode and Scan mode.
5.Coupling status indicator showing the coupling status.
6.Optional software to process the memory data on the PC.
7.Optional thermal mini-printer to print the measured data via RS232 port.
 
Specifications
1.Display:4.5 digits LCD with EL backlight.
2.Measuring Range:0.75～300mm (in Steel).
3.Sound Velocity Range: 1000~9999 m/s.
4.Resolution: 0.1/0.01mm 
5.Accuracy: ±(0.5%Thickness+0.04)mm, depends on materials and conditions
6.Units: Metric/Imperial unit selectable.
7.Four measurements readings per second for single point measurement, and ten per second for Scan Mode.
8.Memory for up to 20 files (up to 99 values for each file) of stored values.
9.Power Source:Two AA size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off).
10.Communication:RS232 serial port.
11.Outline dimensions:150×74×32 mm.
12.Weight:245g
 
Configuration
 
No
Item
Quantity
Note
 
 
Standard Configuration
1
Main body
1
 
2
Transducer
1
Model: N05/90°
3
Couplant
1
 
4
Instrument Case
1
 
5
Operating Manual
1
 
6
Alkaline battery
2
AA size
7
 
 
 
8
 
 
 
 
 
Optional
Configuration
9
Transducer: N02
 
Appendix A
10
Transducer: N07
 
11
Transducer: HT5
 
12
Mini thermal printer
1
 
13
Print cable
1
14
DataPro Software
1
15
Communication Cable
1

Probe optional (Appendix A):

 

Model
Freq. MHz
Diam. Mm
Measuring range
Lower limit
Description
N02
2
22
3.0mm-300.0mm (in steel)
20
For thick, highly attenuating, or highly scattering materials
N05
5
10
1.2mm-230.0mm (in steel)
￠20mm×3.0mm
Normal measurement
N05/90°
5
10
1.2mm-230.0mm (in steel)
￠20mm×3.0mm
Normal measurement
N07
7
6
0.75mm-80.0mm (in steel)
￠15mm×2.0mm
For thin pipe or small curvature
pipe wall thickness measurement
HT5
5
14
3mm-200mm (in steel)
30
For high temperature measurement (up to 300℃)
 

 

Overall Rating
5.0
★★★★★
★★★★★
Based on 50 reviews recently
5 star
100%
4 star
0
3 star
0
2 star
0
1 star
0
All Reviews
  • 1
    12
    Brazil Oct 29.2025
    ★★★★★
    ★★★★★
    123
You May Also Like
Quality Pipe Corrosion Detection Spark Detector, Porosity Holiday Detector elcometer holiday detector factory
Video

Pipe Corrosion Detection Spark Detector, Porosity Holiday Detector elcometer holiday detector

Pipe Corrosion Detection Spark Detector, Porosity Holiday Detectors Holiday Detector Test HD-101 Porosity Detector is employed in the non-destructive detection and location of pinholes, bare spots or thin points in protective coatings applies for corrosion protection over metal and concrete (conductive) surfaces. With corrosion an extremely costly and disruptive worldwide problem, preventative determination becomes essential. For newly constructed tanks, pipelines and other
Quality Ultrasonic Depth Gauge Ultrasonic Thickness Gauge , UT Thickness Gage Ultrasonic Wall Thickness Measurement factory
Video

Ultrasonic Depth Gauge Ultrasonic Thickness Gauge , UT Thickness Gage Ultrasonic Wall Thickness Measurement

Ultrasonic Depth Gauge Ultrasonic Thickness Gauge , UT Thickness Gage Ultrasonic Wall Thickness Measurement Features 1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2.Transducer models are available for special application, including for coarse grain material and high temperature applications. 3.Probe-Zero function, Sound-Veloctiy-Calibration
Quality Pocket Thickness Gauge Ultrasonic Thickness Measurement for Steel plate Pipe wall thickness factory
Video

Pocket Thickness Gauge Ultrasonic Thickness Measurement for Steel plate Pipe wall thickness

Ultrasonic Probe Ultrasonic Thickness Measurement for Chemical Equipment Special design: inbuilt probe, without cable Application: Ultrasonic thickness gauge TG-2930 is used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc.in industries of petroleum, shipbuilding, power station, and machine manufacturing. Measuring range (metric/imperial): 1.0-200mm, 0.05-8inch Operating principle: ULTROSONIC Materials measured:
Quality Eddy Current 0 - 2000um 0.1mm Coating Thickness Gauge TG-2000 Micron Thickness Gauge factory
Video

Eddy Current 0 - 2000um 0.1mm Coating Thickness Gauge TG-2000 Micron Thickness Gauge

Description: With in-built or separate probe(s) Function: TG-2000F (ferrous substrate) TG-2000N (non ferrous substrate) TG-2000FN (2 in 1, F & NF type) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-2000um/0-50mil Resolution; 0.1/1 Accuracy: ±1-3%n or ±2.5um Min. measuring area: 6mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating
Contact Us
You Can Contact Us At Anytime!