vr
86-10-82921131 export@huatecgroup.com
Home  /  Products  /  Coating Thickness Gauge  /  Drying Time Recorder Test Of Drying Time Or Gel Behavior Of A Variety Of Paints And Coatings
Product Description

Product Introduction:

Drying Time Recorder is used for the test of drying time or gel behavior of a variety of paints and coatings. It has the characteristics of intuition and good reproducibility, and can accurately evaluate drying time in all stages.

Drying Time Recorder Test Of Drying Time Or Gel Behavior Of A Variety Of Paints And Coatings 0

Drying Time Recorder Test Of Drying Time Or Gel Behavior Of A Variety Of Paints And Coatings 1

Drying Time Recorder Test Of Drying Time Or Gel Behavior Of A Variety Of Paints And Coatings 2

Drying Time Recorder Test Of Drying Time Or Gel Behavior Of A Variety Of Paints And Coatings 3

Drying Time Recorder Test Of Drying Time Or Gel Behavior Of A Variety Of Paints And Coatings 4

Introduction:

Drying Time Recorder is used for the test of drying time or gel behavior of a variety of paints and coatings. It has the characteristics of intuition and good reproducibility, and can accurately evaluate drying time in all stages.
Initiative design of touch screen control,customized user-defined start time and test time ,make the operation more intuitive and simple.

Technical Specification:

◆Dimension: 550×530×200 mm
◆The number of tracks:10
◆Length of strips: 300 mm
◆Driver:5 sets of motors, 2 track / motor
◆Drying Time:
-Standard track: 6,12,24,48 hours;
-Customized track (track 1):
Except the standard time, the user can customize the start and test time.
◆Function reset during the testing:
During the test, user can change the test time and re-start again.

Drying Time Recorder Test Of Drying Time Or Gel Behavior Of A Variety Of Paints And Coatings 5

Test Timing Table:

Testing Time(hour)
Track No. 6 12 24 48 User Defined Function Reset
1 √ √ √ √ √ √
2 √ √ √ √   √
3 √ √ √ √   √
4 √ √ √ √   √
5 √ √ √ √   √
Remark: "√":The test canbeperformed.
"User Defined":User can set the test time between 1 to 48 hours upon
request,so that can conduct the personlizedtest.
"Function reset":During the test, user can change the test time and restart again.

Standard:

ASTM D5895

Order Information:

1815 Drying Time Recorder

Overall Rating
5.0
★★★★★
★★★★★
Based on 50 reviews recently
5 star
100%
4 star
0
3 star
0
2 star
0
1 star
0
All Reviews
  • 1
    12
    Brazil Oct 29.2025
    ★★★★★
    ★★★★★
    123
You May Also Like
Quality Pipe Corrosion Detection Spark Detector, Porosity Holiday Detector elcometer holiday detector factory
Video

Pipe Corrosion Detection Spark Detector, Porosity Holiday Detector elcometer holiday detector

Pipe Corrosion Detection Spark Detector, Porosity Holiday Detectors Holiday Detector Test HD-101 Porosity Detector is employed in the non-destructive detection and location of pinholes, bare spots or thin points in protective coatings applies for corrosion protection over metal and concrete (conductive) surfaces. With corrosion an extremely costly and disruptive worldwide problem, preventative determination becomes essential. For newly constructed tanks, pipelines and other
Quality Ultrasonic Depth Gauge Ultrasonic Thickness Gauge , UT Thickness Gage Ultrasonic Wall Thickness Measurement factory
Video

Ultrasonic Depth Gauge Ultrasonic Thickness Gauge , UT Thickness Gage Ultrasonic Wall Thickness Measurement

Ultrasonic Depth Gauge Ultrasonic Thickness Gauge , UT Thickness Gage Ultrasonic Wall Thickness Measurement Features 1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2.Transducer models are available for special application, including for coarse grain material and high temperature applications. 3.Probe-Zero function, Sound-Veloctiy-Calibration
Quality Pocket Thickness Gauge Ultrasonic Thickness Measurement for Steel plate Pipe wall thickness factory
Video

Pocket Thickness Gauge Ultrasonic Thickness Measurement for Steel plate Pipe wall thickness

Ultrasonic Probe Ultrasonic Thickness Measurement for Chemical Equipment Special design: inbuilt probe, without cable Application: Ultrasonic thickness gauge TG-2930 is used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc.in industries of petroleum, shipbuilding, power station, and machine manufacturing. Measuring range (metric/imperial): 1.0-200mm, 0.05-8inch Operating principle: ULTROSONIC Materials measured:
Quality Eddy Current 0 - 2000um 0.1mm Coating Thickness Gauge TG-2000 Micron Thickness Gauge factory
Video

Eddy Current 0 - 2000um 0.1mm Coating Thickness Gauge TG-2000 Micron Thickness Gauge

Description: With in-built or separate probe(s) Function: TG-2000F (ferrous substrate) TG-2000N (non ferrous substrate) TG-2000FN (2 in 1, F & NF type) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-2000um/0-50mil Resolution; 0.1/1 Accuracy: ±1-3%n or ±2.5um Min. measuring area: 6mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating
Contact Us
You Can Contact Us At Anytime!