-
Ultrasonic Flaw Detector
-
Ultrasonic Thickness Gauge
-
Coating Thickness Gauge
-
Portable Hardness Tester
-
X-Ray Flaw Detector
-
X-ray Pipeline Crawlers
-
Holiday Detector
-
Magnetic Particle Testing
-
Eddy Current Testing Equipment
-
Penetrant Testing
-
Shore Durometer
-
Brinell Hardness Tester
-
Rockwell Hardness Tester
-
Micro Vickers Hardness Tester
-
Material Hardness Tester
-
Vibration Meter
-
Surface Roughness Tester
-
Profile Projector
-
Gloss Meters
-
Concrete Test Hammer
-
Laser Infrared Thermometer
-
bobAstm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2
-
WilliamAstm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2
-
tomAstm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2
-
LeoAstm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2
HG6450-1D Vibration Meter One Parameter Vibration Measurement Tool ISO Certification

Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xParameter | Displacement Peak-peak (micron) | Range | 1~500 Micron 2~500 Micron |
---|---|---|---|
Operation Temperature Range | 0 - 50C | Size | 160mm X 25mm X 17mm (WxDxH) |
Weight | 120 Gram (including Battery) | Display | 4 Digits LCD, Refresh Interval About 0.5 Second |
Highlight | vibration analyzer,digital vibration meter |
HG6450-1D Remote Switch Velocity Vibration Frequency Meter Vibration Level Meter
General introduction
The HG6450-1D is a one parameter vibration measurement tool capable of measuring vibration displacement (caused by rotational and structural problems like imbalance, misalignment, looseness, etc.).
Extremely reliable and potable, low cost instrument specifically designed for on-site maintenance in your plant or workshop.
This easy to use instrument requires little operator training.
It features with one-button operation, holding function and automatic power off.
With remote switch and magnet base to avoid handheld problem, get reliable and consistent data.
Operation
· Press the meter’s tip gently on the object being measured while keep the meter perpendicular to it (The pressure should be about 0.5 kg).
· Select the measure parameters by click the key quickly:
Displacement,mm
· Start the measurement by continuously pressing the key.
· You may use the remote switch instead of pressing the key. When use a magnet base to fix the meter on the object at the same time, it will give you a more reliable and consistent reading.
· After releasing the key, the result of the last measurement will be held for about 40 seconds, and then the meter will power off automatically.
· The 1st character displayed on LCD will be displacement measured value follows.
· The LCD will show 1 . if exceed this upper limit.
Specification
Measurement parameter | Displacement peak-peak (micron) |
Range | ![]() |
Accuracy | ±10% ± 2 digits (![]() |
Frequency response | 20Hz ~500Hz, ±10% 20Hz ~450Hz, ±5% |
Display | 4 digits LCD, refresh interval about 0.5 second |
Power supply | 1/2 AA, 3.6V, Operation Current 4-7mA |
Battery capacity | >100 hours continuously or 4000 times measurement |
Operation environment |
Operation Temperature: 0oC~50 oC; Relative humidity: < 85% |
Dimensions | 160mm x 25mm x 17mm (WxDxH) |
Weight | 120g (include batteries) |
Case Material | Aluminum |
Notes:
·Avoid intense impact, high temperature and put in water.
·If the HG6450-1D has been used for over one year, please re-calibrate it to ensure the precision.
Standard delivery:
HUATEC HG6450-1D 1pc
Testing needle 2pcs (1 long 1 short),
Control unit with cable 1pc
Magnetic base 1pc
Manual 1pc
Certificate 1pc
Tools kit 1pc