Product Description

Cross Hatch Cutter

Introduction:

2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards.

This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate.

Main Technical Parameters:

1. Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade.

2. Multi-cutting blades spacing:1mm/2mm/3mm

3. The number of square:25squares/100squares

Technical Specification:

Cutting Head No.	Gap(mm)	Blades	Cutters Edges	Coating Thickness(µm)
2202/1	1	6	8	0~60
2202/2	1	11	8	0~60
2202/3	1.5	6	8	0~60
2202/4	2	6	8	61~120
2202/6	3	6	8	121~250

Order Information :

Standard Kit	Contain
2202/1C	Cross Hatch Cutter + Carry Case + Hexagonal Screwdriver + Brush + Magnifier + Tape
2202/2C
2202/3C
2202/4C
2202/6C
Simple Kit	Contain
2202/1S	Cross Hatch Cutter + Paper Box + Hexagonal Screwdriver
2202/2S
2202/3S
2202/4S
2202/6S

digital thickness gauge

coating thickness meter

Overall Rating

5.0

★★★★★

Based on 50 reviews recently

5 star

100%

4 star

0

3 star

0

2 star

0

1 star

0

All Reviews

1

12

Brazil Oct 29.2025

★★★★★
★★★★★

123

Pipe Corrosion Detection Spark Detector, Porosity Holiday Detector elcometer holiday detector

Pipe Corrosion Detection Spark Detector, Porosity Holiday Detectors Holiday Detector Test HD-101 Porosity Detector is employed in the non-destructive detection and location of pinholes, bare spots or thin points in protective coatings applies for corrosion protection over metal and concrete (conductive) surfaces. With corrosion an extremely costly and disruptive worldwide problem, preventative determination becomes essential. For newly constructed tanks, pipelines and other

Video

Ultrasonic Depth Gauge Ultrasonic Thickness Gauge , UT Thickness Gage Ultrasonic Wall Thickness Measurement

Ultrasonic Depth Gauge Ultrasonic Thickness Gauge , UT Thickness Gage Ultrasonic Wall Thickness Measurement Features 1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2.Transducer models are available for special application, including for coarse grain material and high temperature applications. 3.Probe-Zero function, Sound-Veloctiy-Calibration

Video

Pocket Thickness Gauge Ultrasonic Thickness Measurement for Steel plate Pipe wall thickness

Ultrasonic Probe Ultrasonic Thickness Measurement for Chemical Equipment Special design: inbuilt probe, without cable Application: Ultrasonic thickness gauge TG-2930 is used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc.in industries of petroleum, shipbuilding, power station, and machine manufacturing. Measuring range (metric/imperial): 1.0-200mm, 0.05-8inch Operating principle: ULTROSONIC Materials measured:

Video

Eddy Current 0 - 2000um 0.1mm Coating Thickness Gauge TG-2000 Micron Thickness Gauge

Description: With in-built or separate probe(s) Function: TG-2000F (ferrous substrate) TG-2000N (non ferrous substrate) TG-2000FN (2 in 1, F & NF type) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-2000um/0-50mil Resolution; 0.1/1 Accuracy: ±1-3%n or ±2.5um Min. measuring area: 6mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating

Contact Us

You Can Contact Us At Anytime!