-
Ultrasonic Flaw Detector
-
Ultrasonic Thickness Gauge
-
Coating Thickness Gauge
-
Portable Hardness Tester
-
X-Ray Flaw Detector
-
X-ray Pipeline Crawlers
-
Holiday Detector
-
Magnetic Particle Testing
-
Eddy Current Testing Equipment
-
Penetrant Testing
-
Shore Durometer
-
Brinell Hardness Tester
-
Rockwell Hardness Tester
-
Micro Vickers Hardness Tester
-
Material Hardness Tester
-
Vibration Meter
-
Surface Roughness Tester
-
Profile Projector
-
Gloss Meters
-
Concrete Test Hammer
-
Laser Infrared Thermometer
-
bobAstm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2
-
WilliamAstm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2
-
tomAstm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2
-
LeoAstm E114-15 Inch Type 1018 Calibration Test Block Carbon Steel Mini Iiw 2
360mm Wide X Ray Film Dryer With 200-240v 50 / 60hz 5a Power Hdl-350 Ndt

Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xDelivery Width | 360mm | Running Time | 60S Per (14 "X17") |
---|---|---|---|
Dry Weight | 8 X 350mm (4 * 14), 270 Pieces Per Hour | Power | 200-240V 50/60Hz 5A |
Water Consumption | 2 Liters / Minutes Of Film Operation | Volume | 570 X 320 X 395 X (long * Width * Height) |
Weight | Net Weight 21Kg, Gross Weight: 26Kg (including Packing). | ||
Highlight | welding x ray machine,industrial x ray machine |
HDL-350 NDT film dryer is a kind of automatic drying equipment designed to solve the problems of laboratory, NDT and hand washing film.
1 machine cover 2 power switch 3 heating air 4 drying axle rack 5 drive motor
6 sending sheet plate 7 power outlet 8 overflow outlet 9 drain port 10 inlet electromagnetic valve interface
Working principle
According to the principle of the baking sheet of the fully automatic washing machine, put the hand washed film on the sheet feed plate. After the film sensor detects the film, the machine's transmission mechanism begins to run and will automatically send the film into the dryer, and the PTC drying component below starts to blow the hot air directly onto the film, and the film is dried by drying the suction shaft. After the water absorption and hot air blow drying, the film is taken directly from the chip outlet. The whole process can only be obtained for 45 seconds, and the staff can get a dry film directly to evaluate the film.
Technical parameter
1. dry sheet flow: →water washing → drying
2. delivery width: 360mm
3. running time: 60S per (14 "X17")
4. dry weight: 8 x 350mm (4 * 14), 270 pieces per hour.
5. power: 200-240V 50/60Hz 5A
6. water consumption: 2 liters / minutes of film operation
7. volume: 570 x 320 x 395 x (long * width * height)
8. weight: net weight 21Kg, gross weight: 26Kg (including packing).